The Level 3 Diploma in Shopfitting Bench Joinery qualification has been developed for achievement in a training environment which means you do not need to be employed to undertake this qualification. This qualification enables you, the learner, to demonstrate and recognise your skills, knowledge and understanding so you can progress onto further training at level 3 or on successfully completion of the level 2 progress into a job role in the workplace. This qualification enables you, the learner, to demonstrate and recognise your skills, knowledge and understanding so you can work as a Shopfitter within the construction industry. You will be assessed against a set of performance and knowledge statements which have been derived from National Occupational Standards for your occupational area. You will be trained and assessed by an occupationally competent and qualified trainer whose job is to help you complete your qualification. This qualification supports the learner to attain enabling, fundamental and transferable practical skills with associated underpinning knowledge. This qualification is not graded. This qualification can be taken as part of an apprenticeship framework, if desired. This qualification sits within the Construction Apprenticeship Framework in England and Wales. This can be taken alongside the following qualifications in contribution towards achievement of a Level 3 Advanced Apprenticeship in Construction Building -Wood Occupations -Shopfitting: -Level 3 NVQ Diploma in Wood Occupations -Shopfitting Bench Joinery For further information about the Construction Apprenticeship Frameworks, please see website: www.afo.sscalliance.org. This qualification is supported by the National Association of Shopfitters and Interior Contractors (NASIC). This qualification comprises the following 13 mandatory units; -Know how to carry out safe working practices in construction -Carry out safe working practices in construction -Knowledge of information, quantities and communicating with others -Information, quantities and communicating with others -Knowledge of building methods and construction technology -Building methods and construction technology -Know how to set up and use fixed and transportable machinery -Set up and use fixed and transportable machinery -Know how to produce complex shaped shopfitting product details -Produce complex shaped shopfitting product details -Know how to manufacture complex shaped shopfitting products -Manufacture complex shaped shopfitting products -Construct a Bow Front Shop Window (Practical Synoptic Assignment).
The Learner will learn key practical skills and knowledge in:
-Know how to carry out safe working practices in construction
-Carry out safe working practices in construction
-Knowledge of information, quantities and communicating with others
-Information, quantities and communicating with others
-Knowledge of building methods and construction technology
-Building methods and construction technology
-Know how to set up and use fixed and transportable machinery
-Set up and use fixed and transportable machinery
-Know how to produce complex shaped shopfitting product details
-Produce complex shaped shopfitting product details
-Know how to manufacture complex shaped shopfitting products
-Manufacture complex shaped shopfitting products
-Construct a Bow Front Shop Window (Practical Assignment)
There are no formal entry requirements to take this qualification. This qualification can be undertaken without any previous training or qualifications in this subject area.
You do not need any prior qualifications to undertake this level 3 qualification however we do offer a level 2 in Shopfitting Bench Joinery which will give you the knowledge and skills required to work in the construction industry. If you have already undertaken a level 2 qualification in Shopfitting or a similar qualification or have relevant experience, you may already have the skills and knowledge required to undertake this qualification.
On completion of this qualification you will have obtained the skills, knowledge and understanding to progress on to a higher level qualification in the same or similar occupational area or progress into employment in their chosen trade. For further details on other qualifications available in this occupational area, see our Qualification Search on the NOCN website. Industry will accept the qualification on its own as entry to a job role.
Achievement of this qualification within an Advanced Apprenticeship in Construction Building – Wood Occupations (Shopfitting) could lead to a higher apprenticeship framework, if desired.
This could include:
-Level 4 Higher Apprenticeship in Construction Site Management:
-Level 4 NVQ Diploma in Construction Site Supervision
For further information about the Construction Apprenticeship Frameworks, please see website: www.afo.sscalliance.org.
The Qualification structure below specifies the combination of units that need to be achieved for the individual to be awarded the qualification.
Qualification Title: L3 Diploma in Shopfitting Bench Joinery
Minimum Credit Value: 143
Total Qualification Time (TQT) for this qualification: 1430
An estimate of the total time it could reasonably be expected for a learner to achieve a qualification. TQT includes guided learning hours (GLH) plus an estimate of the time a learner is likely to spend in preparation, study or other learning activities as directed by but not under the immediate guidance of a lecturer, supervisor, or tutor.
Minimum Guided Learning Hours (GLH) for this qualification: 1015
The time a learner spends in activities under the immediate guidance or supervision of a lecturer, supervisor, or tutor. This includes assessment if under supervision.
To achieve this qualification a minimum of 143 credits need to be attained. This comprises the 13 mandatory units.
The assessment requirements set for this qualification are multiple choice knowledge tests and a synoptic practical assignment. This qualification is not graded.
The Synoptic Practical Assignment will cover all of the skills learning outcomes and assessment criteria for all of the units. They are designed to be taken within a simulated construction environment, away from the stresses and distractions experienced on a real site. They are to be taken within a set period of time at the end of the whole qualification. The assignments are to be monitored and marked by the trainers.
The knowledge assessment is designed to be taken on a computer using the NOCN Cskills Awards online testing platform. However paper testing is also available. The tests are externally set and marked multiple choice tests where learners can choose one of four possible answers. The tests cover the learning outcomes for each unit and measures that they have been met.
Assessments designed by centres must be accessible and inclusive and the assessment methodology must be appropriate for individual assessment, giving due consideration to any assessment requirements attached to individual components.
If you are a NOCN Recognised Centre and have learners with particular requirements, please see the NOCN Reasonable Adjustments Policy and Procedure found on the NOCN website at www.nocn.org.uk.
This policy gives clear guidance on the reasonable adjustments and arrangements that can be made to take account of disability or learning difficulty without compromising the assessment criteria.
The NOCN Centre Recognition process requires the centre to hold policy statements on Equal Opportunities, Diversity and Disability Discrimination which will be reviewed by NOCN. Please contact firstname.lastname@example.org for further details.
Recognising Prior Learning is an assessment process that recognises learning that has its origins in a learner’s experience and/or previous formal and informal learning contexts. This includes knowledge and skills gained within school, college, university and outside formal learning situations such as through life, employment, apprenticeships and other work experiences.
NOCN is committed to the Recognition of Prior Learning (RPL) and has developed a policy and procedures to inform and support Centres, which is available on the NOCN website.
In order to gain and retain NOCN qualification approval status, centres must continue to meet the required standards of NOCN regarding internal management and systems, delivery staff, resources and equipment, assessment and training, internal quality assurance and external assessment arrangements. Each requirement is detailed as one of NOCN’s Approval Criteria.
For a full list of NOCN Approval Criteria, as well as further guidance and support in meeting that criteria, please refer to the NOCN Quality Assurance Manual, available on the NOCN website under the ‘Help & Support’ section.
Centre Staff Requirements
As part of the requirement to deliver this qualification, the Centre staff involved with the delivery, assessment and quality assurance of the qualification must have a demonstrable level of expertise. NOCN expects that all Tutors/Trainers, Assessors and Internal Quality Assurers are able to demonstrate that they have the relevant occupational knowledge and experience to perform their role.
Tutor/Trainer and Assessor Requirements
A Tutor/Trainer includes anyone within your Centre who is facilitating the training to learners in any environment e.g. tutor, trainer, teacher, coach, facilitator.
A Tutor is not required for NOCN_Cskills Awards NVQ qualifications, but is required for construction training diplomas.
All construction qualifications require an Assessor. For training diplomas, an individual can perform both roles of Tutor/Trainer and Assessor, where they meet the individual requirements for both. Tutors/Trainers and Assessors are not able to perform the role of the Internal Quality Assurer for cohorts where they have delivered training or assessment.
All Tutors/Trainers and Assessors must:
Any specific assessment/training requirements are detailed under the Assessment guidance and/or in the requirements section of each unit.
Internal Quality Assurer Requirements
All construction qualifications must be internally quality assured by an appropriately qualified and experienced IQA. Each Centre must have a quality system which ensures that decisions made by assessors are appropriate, consistent, fair and transparent, and that they do not discriminate any learner. The quality system must ensure the quality of the award, ensuring validity, reliability and consistency.
Further guidance regarding the requirements of a Centre’s quality system is detailed within the Quality Assurance Manual.
All Internal Quality Assurers must:
Resources and Equipment
For training diplomas, centres must have the resource available for the assessment and training requirements as set out by the relevant health and safety acts. There should be adequate provision of physical resources to support the learning and meet the requirements of the qualification/training.
Please refer to the specific resources and equipment specification for each individual training diploma.
Once recognised as a Centre, NOCN will allocate an External Quality Assurer. The External Quality Assurer will have ongoing responsibility for monitoring the Centre’s compliance with the requirements of centre recognised status.
The External Quality Assurer will make regular visits to all Centres. During these visits he/she will:
Monitor the Centre’s compliance with the Centre Recognition agreement by reviewing course documentation, meeting managers, tutors, internal quality assurers, learners and administrative staff.Verify recommendations for achievement submitted by the Centre via Quartzweb if the Centre does not hold DCS.
Refer to the NOCN Quality Assurance Manual for further information on the External Quality Assurance process.
If your centre is already recognised to offer NOCN qualifications and would like more information about this qualification, please contact: email@example.com.
Use Horizon to add this qualification to your centre.
If you are interested in offering this qualification, but are not yet a NOCN Approved Centre please see Become a Registered Centre on our website www.nocn.org.uk and complete the New Business Enquiry Form.
Min Credits : 143
Description: To achieve this qualification a minimum of 143 credits need to be attained. This comprises all of the 13 mandatory units.
Min Credits : 143
Description: The learner must achieve 143 credits from the units in this group.
|Building methods and construction technology 3||M/501/7444||5||Level 3|
|Carry out safe working practices in construction||D/501/7455||3||Level 1|
|Construct a Bow Front Shop Window (Practical Synoptic Assignment)||H/501/7635||3||Level 3|
|Information, quantities and communicating with others 3||Y/501/7440||10||Level 3|
|Know how to carry out safe working practices in construction||Y/501/7454||4||Level 1|
|Know how to manufacture complex shaped shopfitting products||M/501/7640||16||Level 3|
|Know how to produce complex shaped shopfitting product details||T/501/7638||12||Level 3|
|Know how to set up and use fixed and transportable machinery||K/501/7636||2||Level 3|
|Knowledge of building methods and construction technology 3||H/501/7442||9||Level 3|
|Knowledge of information, quantities and communicating with others 3||H/501/7439||11||Level 3|
|Manufacture complex shaped shopfitting products||H/501/7635||49||Level 3|
|Produce complex shaped shopfitting product details||A/501/7639||16||Level 3|
|Set up and use fixed and transportable machinery||M/501/7637||3||Level 3|
|Extension of various Qualifications||Amendment||B19-22||26/3/2019|